Flagpole Anti-Theft Items

Locks & Keys for Cleat Boxes

Halyard Covers for Flagpoles

This 1.75" wide by 1" deep aluminum channel is designed to be used with the cleat cover boxes above by providing additional protection 5', 6', 8' or 10' above the cleat cover box.

The 5', 6' and 8' models have an upper and lower hinge assembly and is secured to the pole with six #10-32NC stainless steel pan head screws (included). These covers can ship UPS ground in a long triangle tube.

The 10' model has upper, middle and lower hinge assemblies and is secured to the pole with nine #10-32NC stainless steel pan head screws (included). 10' covers must ship via common carrier truck and shipping cost will need to be quoted based on your shipping address. Call for a quote

Wall Mounted Cleat Cover Boxes

This unit comes complete with a cleat cover box mounted onto a 2" high, 12" wide, 1/8" thick aluminum plate. Designed to be mounted using thru wall bolts or expansion shields utilizing 5/8" diameter threaded rod. Expansion shields are supplies as a standard; if thru-wall bolts are required please specify length. All nuts, washers & lock washers are supplied for a complete installation.

Wall Mounted Halyard Covers

The aluminum plate to which the halyard cover is attached measures 6" wide, 1/8" thick and the height is determined by the length of the halyard cover. These units are designed to be mounted using thru-wall bolts or expansion shields utilizing 5/8" diameter threaded rod. Expansion shields are supplied as standard. If thru wall bolts are required please specify length. All nuts, washers & lock washer are supplied for a complete installation.

Outrigger Poles and Supplies

In-Ground Pole Ornaments